F64-USB V2

Sonderpreis Preis £959.00 Normaler Preis Einzelpreis  pro 

inkl. MwSt. zzgl. Versand
The Ascher Racing F64-USB V2 is a high quality sim racing steering wheel that is machined out of automotive aluminium with ergonomic rubber grips for optimum control and durability. On the back of the wheel there are four paddles. Two magnetic gear paddle shifters and two clutch paddles which are contactless for a much smoother operation.
  • platform independent USB connection
  • 285mm diameter
  • ergonomic rubber grips 
  • 12 x push buttons with tactile feeling
  • 2 x multifunctional 7-way joysticks
  • 4 x encoders (inc. push button functionality)
  • 2 x 12-position rotary switches
  • magnetic paddle shifters
  • contactless clutch paddles
  • labels for various common steering wheel inputs

 

New Features

Compared to its previous model, the F64-USB V2 features new 12-position switches which provide improved feedback, a closed shape and motorsport rubber grips.

  • Improved grip ergonomics including slightly larger diameter, thinner lower section, different top shape to push top button
  • Rubber grips:
    • are not showing any tear
    • offers much more grip
    • perfect hardness (not too soft, not too hard) for much easier endurance racing without getting exhausted
    • can be used without using gloves (also with sweaty hands)
    • better hygienics
  • new 12-position rotary knob
    • better usability in “encoder mode” (rotational symmetry)
    • much better feedback

64 Inputs

  • 12 x push buttons with positive tactile feeling
  • 2 x protective button guards
  • 2 x multifunctional 7-way joysticks (4 directions / rotate clock- anticlockwise/ push button)
  • 4 x encoders inc. push button functionality, aluminium knob
  • 2 x 12-position rotary switches, aluminium knob
  • 2 x paddle shifters
  • 2 x clutch paddles with electronic bite-point calibration

Magnetic Paddle Shifters

  • cnc machined and anodized out of automotive aluminium
  • strong snap-action force
  • alternative magnets to reduce force included
  • reliable automotive switch

Contactless Clutch Paddles

  • cnc machined and anodized out of automotive aluminium
  • contactless hall sensor
  • smooth operation for maximum control

electronic bite-point calibration

  • precise adjustments in 1.0 % and 0.1 % increments
  • change bite-point via configuration tool or directly on the wheel rim:
    1. push both joystick buttons for 1s to acces bite-point mode
    2. LED lights up to indicate calibration mode
    3. rotate left joystick for 1.0 % increments / right joystick for 0.1 % increments (LED flashes to indicate changes)
    4. exit calibration mode by pushing both joysticks again for 1s
  • recommended procedure for finding best setting:
    1. enter calibration mode and set bite-point to high value, e.g. 80 %
    2. pull slave clutch only
    3. apply throttle
    4. reduce bite-point in 1.0 % increments (left joystick) until vehicle starts moving
    5. make test starts to fine tune desired bite-point setting
    6. exit bite-point calibration mode
  • recommended procedure for quick race starts
    1. pull both master and slave clutches
    2. apply throttle
    3. race start -> let master clutch snap
    4. it will take less than 20 ms to reach desired bite-point
    5. slowly release slave clutch

High Quality Finish

  • Maximum grip level from closed, ergonomic rubber grips
  • machined out of automitive aluminium
  • black anodized and laser engraved
  • brushed frontplate surface finish
  • glass bed blasted paddle surface finish

Button Labels

  • 50 pcs button labels each black and white
  • 72 pcs encoder labels (blue, green, red, black, yellow, white)
  • labels for various common steering wheel inputs

General Information

  • 285 mm wheel diameter
  • 6 x 70 mm bolt pattern
  • robust, shielded coiled cable with industrial Binder M16 connector
  • coiled cable connector length approx. 64mm
  • spacer may be required to create sufficient clearance to the wheel base
  • M5 x 12 mm stainless screws to mount QR included
  • Quick Release not included
  • to mount M5 threaded QRs, use captive screws
  • mass: 1140 g

Compatible Wheelbases

  • Simucube 2 
  • Simucube 1 (OSW, Mige) 
  • Accuforce*
  • Leo Bodnar** 
  • OSW (Argon)**
  • Simagic*
  • VRS Direct Force*** 
  • Fanatec Podium Hub*

 

captive screws   are required
** Wheelbase comes without QR
*** longer screws are required